IMPROVE YOUR LIGHTING
- PARABOLIC LOUVERS -
The advantage of Parabolic Louvers is the high degree of controlled light distribution that they offer. This precise light control makes Parabolic Louver ideal for areas with moderate to high concentrations of computer terminals or other visually demanding environments This control is dependent upon the shielding angle offered by the specific louver and the degree of specularity of the finish. Parabolic Louver are the optimum choice for areas where visual comfort and controlled reflection off of vertical
PARASQUARE®1
SMALL CELL LOW GLARE
PARABOLIC LOUVER
P1® is the internationally recognized industry standard small cell injection molded plastic parabolic louver. The nominal 5/8” x 5/8” x 7/16” (16 x 16 x 10,2mm) cell size provides luminances that conform to important major standards. P1 is available in molded configurations that are readily adapted to the widest range of applications and dimensional modules.
CEILING STYLE
5/8” X 5/8” X .400”
16 x 16 x 10,2mm
*ESP: 9/16” X 9/16” X .400”
14,3 x 14,3 x 10,2mm
FIXTURE STYLE
4 and 4X : 5/8” X 5/8” X .400”
6 x 16 x 10,2mm
The fixture style parts include an integral flange that may be used full size or trimmed to achieve lesser overall dimensions. The style 4X is molded to a generic size that fits many fixtures without trimming. Other sizes can be fabricated. Call for details.
PARASQUARE®2
MEDIUM CELL LOW GLARE
PARABOLIC LOUVER
P2® is the industry standard 1-1/2” x 1-1/2” x 1” (38 x 38 x 25,4mm) injection molded plastic parabolic louver. This internationally accepted product satisfies the demands of both efficiency and luminance control. Molded in a number of configurations P2 is adaptable to a wide range applications. P2 is an important option when a medium scale plastic parabolic louver is required.
CEILING STYLE
1-1/2” X 1-1/2” X 1”
38 x 38 x 25,4mm
FIXTURE STYLE 4 & 4X
1-1/2” X 1-1/2” X 1” 38 x 38 x 25,4mm
The fixture style parts include an integral flange that may be used full size or trimmed to achieve lesser overall dimensions. The style 4X is molded to a generic size that fits many fixtures without trimming. Other sizes can be fabricated. Call for details.
PARASQUARE®3
ENHANCED EFFICIENCY
LOW GLARE LOUVER
Parasquare 3® with mid-sized 3/4” x 3/4” x 1/2” (19 x 19 x 12,2mm) cells provide 35 degree shielding and maintains energy saving efficiencies. P3® reflects SLP’s commitment to high efficiency louvers by offering not only an unsurpassed optically engineered wedge back design but also the molded louver configurations that will maximize energy budgeted applications. For the world market, P3® is also offered in an unflanged metric panel size.
CEILING STYLE
3/4” X 3/4” X 1/2”
19 x 19 x 12,2mm
FIXTURE STYLE
3/4” X 3/4” X 1/2”
19 x 19 x 12,2mm
The fixture style four flanged configu.7ra5”tions assure finished parts with 19mm the best fit and the minimum amount of exposed flange.
PARASQUARE®4
DISCONTINUED
PARASQUARE®5
HIGH EFFICIENCY CONTROLLED
GLARE LOUVER
P5® is the low brightness louver of choice when energy budgeting is critical and controlled luminance is required. The 3/4” x 3/4” x 3/8” (19 x 19 x 9mm) flat back louver design affords efficiencies equal to those of lenses while maintaining 99% of it‘s distribution in the 0-60 degree zone. SLP’s P5® is available in molded metric panel sizes*: available on special order, ceiling size 2‘ x 4’ and two flanged sizes. Custom sizes are available. Call for details.
CEILING STYLE
3/4” X 3/4” X 3/8” 19 x 19 x 9mm
Metric Louver Size: 595 x 1195mm
620 x 1245mm
FIXTURE STYLE
3/4” X 3/4” X 3/8” 19 x 19 x 9mm
SLP’s P5® is available in two flanged sizes that will fit many fixtures without any cutting or modification. Special sizes and fabrication are available. Call for details.